District Heating Explained: How Heat Networks Work and What They Cost to Run

District heating supplies heat from a central energy centre to multiple buildings through insulated pipes carrying hot water. It can serve a whole neighbourhood or site; communal heating usually serves one building, while an individual boiler heats a single home. What it costs to run depends on the scheme, its tariff and how well its equipment is operated and maintained.
For residents, it helps to know what your heat meter measures and who to contact when something goes wrong. For building and facilities managers, the important questions include where heat is generated, how it is distributed and who is responsible for each part of the system.
How does a district heating network work?
A typical heat network has a central energy centre, distribution pipework and equipment inside each connected building. Hot water flows from the energy centre through insulated pipes; heat is transferred to the building’s heating and hot-water systems, and the cooler water returns to be reheated.
In many residential schemes, a heat interface unit (HIU) in each dwelling transfers heat from the network to the home’s own heating and hot-water circuits. A heat meter records the heat used by that dwelling. The HIU generally keeps the network water separate from the water circulating through the home’s radiators and taps.

The exact arrangement varies. Some schemes have a plant room in each building as well as a central energy centre; others use different forms of building-level equipment or connect buildings in stages.
What is the difference between district heating and communal heating?
The terms are sometimes used loosely, but the distinction is useful. District heating generally describes a network distributing heat to several buildings. Communal heating usually means a central system serving multiple homes within one building, such as a block of flats.
Both can use an energy centre, distribution pipes and HIUs. Both also need clear arrangements for metering, billing, maintenance and repairs. If you are a resident or leaseholder, check your building documents or ask the managing agent which organisation operates the system and who handles faults.
What heat sources can an energy centre use?
An energy centre may use gas boilers, gas combined heat and power (CHP), biomass, heat pumps, recovered waste heat or a combination of sources. Some networks use ambient loops, where lower-temperature heat is circulated and upgraded within buildings or at local plant.
The heat source affects the network’s emissions and costs, but it does not tell the whole story. Fuel and electricity prices, equipment efficiency, operating temperatures, maintenance and heat losses all matter. A network using a lower-carbon source is not automatically cheaper to run, and a particular technology does not guarantee a particular bill.

Is district heating cheaper than an individual boiler?
There is no reliable answer without knowing the scheme and its tariff. A resident’s bill depends on the heat price per kWh set by the operator, any standing charge, the amount of heat used, how accurately the meter reads and how efficiently the network and HIU perform. The home’s controls and heat demand also affect consumption.
Ask the operator or supplier for the heat tariff and standing charge, expressed in p/kWh and £ per billing period respectively. Check how the meter is read and whether the bill separates the fixed charge from heat consumption.
Network heat losses are another factor. Heat escapes from distribution pipes as hot water travels between the energy centre and buildings. Some loss is part of operating a network, but poorly insulated or poorly controlled pipework can waste more heat than necessary. That wasted heat has to be generated and paid for somewhere in the system.
Why can a heat network underperform?
A network can have good equipment and still perform poorly if parts of the system are not correctly selected, commissioned or maintained. Common causes include:
- Debris or poor water quality: Sludge and scale can block strainers and foul heat exchangers in HIUs, reducing heat transfer and affecting heating or hot water.
- Poor commissioning: Incorrect settings or balancing can leave some flats short of heat while other parts of the system receive too much.
- Plant that is oversized or undersized: A poor match between plant capacity and demand can lead to inefficient operation, difficulty meeting peak demand or excessive cycling.
- Uncontrolled heat losses: Damaged, missing or inadequate insulation allows heat to escape from distribution pipework, including pipes within buildings.
- Differential pressure problems: Pressure that is too high, too low or uneven can cause noise, poor circulation and unreliable performance across different risers or dwellings.
- Weak metering and maintenance: Meters that do not read correctly make consumption and billing harder to check. Without routine checks, faults can persist and underlying patterns may be missed.
These issues are best diagnosed across the system rather than by treating every flat’s complaint as an isolated fault.
Who maintains a heat network?
Maintenance usually has two main levels. In the energy centre, planned work may cover boilers or other heat sources, pumps, pressurisation equipment, water treatment and controls. In each dwelling, the HIU may need servicing and checks to its strainers, valves and heat exchangers.
A network is only as reliable as its weakest section. Responsibilities are often split between the heat network operator, landlord or managing agent, and maintenance contractors. If the contract does not clearly say who owns an asset, arranges access or acts on defects, accountability can slip.

What should operators check?
A practical maintenance plan should include:
- An asset register covering the energy centre, distribution system and dwellings.
- A clear contract-level split of responsibilities between operator, landlord and contractors.
- Meter checks to confirm that readings are being recorded correctly.
- A water treatment and inhibitor regime, with records of checks and corrective work.
- A planned preventative maintenance (PPM) schedule and a live defect log.
- Records of HIU faults by block and riser, so recurring or network-wide patterns can be identified.
When residents in several homes report similar problems, it is worth checking shared equipment and distribution conditions as well as individual HIUs.
What should residents check?
If your heating or hot water is unreliable, first find out who is responsible for the HIU and how to report a fault. Ask for the heat tariff in p/kWh, any standing charge, how your meter is read and how to query a bill.
If other flats have the same problem, mention this when reporting it. A shared fault may point to a riser, building plant or wider network issue rather than a problem inside your flat alone.
How is district heating regulated?
Heat networks are regulated in Great Britain, and obligations relating to areas such as metering, pricing transparency and customer service may apply. The requirements depend on the network and the organisations operating or supplying it, so managers should check the relevant guidance rather than assume every scheme is treated identically.
Ofgem’s heat networks guidance is a useful starting point for operators and customers. This article is general information, not legal advice.
Frequently asked questions
Is district heating cheaper than a gas boiler?
Not necessarily. It depends on the heat tariff, standing charge, household consumption, network losses and the performance of the scheme. Compare the actual tariff and charges rather than assuming a network will cost more or less.
What is the difference between district heating and communal heating?
District heating usually supplies several buildings from a network. Communal heating usually serves multiple homes within one building. The terms can be used differently, so check how the scheme and its contracts define them.
Who maintains a heat network?
Responsibility may be divided between the network operator, landlord or managing agent and contractors. Check the service arrangements to see who maintains the energy centre, distribution pipework, building plant and HIU.
Why is my heat network hot water unreliable?
Possible causes include a fault with the HIU, blocked strainers, poor water quality, pressure problems or an issue with shared plant or pipework. Report the fault to the named contact and say if other homes are affected too.
Can I change supplier on a heat network?
Residents may not be able to choose a separate heat supplier in the same way as for a household gas or electricity supply. Check your agreement and ask the operator or landlord how the scheme’s supply and billing arrangements work.
If you manage a heat network, a walk-round of the energy centre or a conversation about the scheme’s maintenance can help clarify where to investigate first. PureTherm provides commercial heating and HVAC engineering support across Hertfordshire, Bedfordshire and London, including Letchworth Garden City, Hitchin, Stevenage, Baldock, Welwyn Garden City, Hertford, Royston and Biggleswade. We are an owner-led independent business, with direct contact with the engineer, over 30 years’ heating and HVAC experience, Gas Safe registration (978743), F-Gas qualification and full insurance. Find out more about our commercial HVAC services or contact us to discuss your system.
